CCTV has become an integral part of modern security systems. This worthwhile investment helps to keep your property, assets, and the people in your life safe. However, if you are installing a CCTV system, it’s important to know how these systems work, as well as best practices for maintenance and repair of a CCTV cable installation.

Whether you are installing dome or bullet cameras, it’s important to have a comprehensive knowledge of these systems. Read on to learn the basics of CCTV installation, repair and maintenance, and if in doubt, always call in the professionals!

CCTV Cable Installation

You will come across plenty of options when it comes to choosing premium quality CCTV security systems. You can go with the traditional analogue approach or you can opt for wireless security cameras.

Supplies You’ll Need:

  • CCTV Cameras

Of course, you’ll need to have the components and devices to install the cables with. Make sure you do your research and find the right CCTV cameras to fit your needs.

  • Cables

The next thing you’ll need on hand when installing your system are the right cables. Make sure you have cables that are compatible with your CCTV cameras.

  • Video Recorder

CCTV systems often run through a video recorder, as this is the central point that connects all additional components such as cables, monitors, and cameras.

  • Monitor
    Monitors are essential for CCTV security systems, as without these you will not be able to view video footage.
  • Tools
    You will need a proper toolkit to install a CCTV security system as it involves a range of complex components. At a minimum, you will need stripping tools, crimpers, wire pliers, a drill, and wire cutters.
  • Time
    It’s important to understand that CCTV installation will take a decent amount of time. Don’t just leave it to the last minute because this is not a one-day job. You should also be wary of bad weather and consider the location, your expertise, and the number of devices that you have to install.
  • A Professional

It may be best to have an expert to help you with the installation process. Unless you have the necessary skills and experience, it’s worth calling in an expert to ensure that everything is fitted correctly.

How to Install CCTV Cables

  1. Locate the exact points where you want to install your cameras. It is critically important to identify each location as this will tell you where your cables need to go. Check the line of sight and see if the angles can be adjusted by height to get adequate coverage.
  2. Examine the kit you have purchased and check all the devices. Make sure that you can easily access all the components.
  3. The next step is to run the cables. Identify which cable must be installed with which device, and secure it properly. It may help to have an extra set of hands and even professional expertise to guide you.
  4. Next, connect the cables to the video recorder – this will either be a Digital Video Recorder or a Network Video Recorder. Both of these are essentially the same with little differences in terms of features. Make sure that the video recorder is close to the monitor, preferably on the same desk.
  5. Connect the cameras to the cables to install them. Connect the cameras to the power source, then mount the camera in an optimal position that allows you to observe the desired field of view.
  6. Lastly, connect the video recorder to the monitor so that you can check and save all video feeds.

CCTV Maintenance

It is essential to maintain your CCTV security system to ensure it continues to perform well. Aim to check your surveillance cameras every few months. Check their batteries, clean their lenses, and make sure they are in good working order.

Look out for any fraying cables and replace them as soon as possible to ensure that the system is not compromised. Make sure you check the quality of the images and videos. It is wise to get a professional involved as they will help you identify any problems in the system.

You should also look out for any damaged or worn parts, be it cables, cameras, or other devices to ensure the smooth operation of your CCTV cable installation.

CCTV Repairs

If you are conducting routine checks and you observe that one of the cameras is not functioning well, you should replace or repair the individual device or component.

  • Check the power cables and ensure there are no knots or broken wires. Try to connect the cameras to a power source and not a battery and adjust the wattage accordingly.
  • Check all screws and bolts are in place and replace or tighten any loose components.
  • Clean all connectors and cable parts regularly.
  • If issues persist, reset the camera to factory settings. This should be your last resort, because it will erase all your saved data.